REGISTRATION CAMA 2020 Guide

How Do You Register an Aviation Fuelling Filtration and Water Separation Servicing Contractor with CAC and NCAA?

CACTalks Verified
Oct 18, 2026 • 4 min read
How Do You Register an Aviation Fuelling Filtration and Water Separation Servicing Contractor with CAC and NCAA?
How Do You Register an Aviation Fuelling Filtration and Water Separation Servicing Contractor with CAC and NCAA?
Quick Overview

Key Takeaways & Regulatory Highlights

  • Minimum Share Capital: The NCAA and airport authorities require technical aviation service contractors to possess substantial capital reserves. The company must be registered with an...
  • Specific Object Clauses: The Memorandum and Articles of Association (MEMART) must explicitly state technical aviation fuel support services, including filter water separator (FWS) maintenance, coalescer...
  • Tax Registration: Generate the corporate Tax Identification Number (TIN) and complete Value Added Tax (VAT) and Company Income Tax (CIT) profile activation on FIRS...
  • Oil Service Company Permit: Secure an approved permit under the specialized petroleum technical services category from NMDPRA.

Registering an aviation fuelling filtration and water separation servicing contractor in Nigeria requires incorporating a specialized private limited company with the Corporate Affairs Commission (CAC) and securing regulatory certification from the Nigeria Civil Aviation Authority (NCAA) as an approved Aviation Ground Handling or Technical Petroleum Support Contractor. Because contaminated aviation turbine kerosene (ATK/Jet A-1) creates catastrophic flight safety risks, operations are strictly governed by the Civil Aviation Act, NCAA Regulations, and international standards established by the Joint Inspection Group (JIG) and Energy Institute (EI).

The Specialized Regulatory Framework

Aviation fuel filtration and water separation are critical technical services. Microscopic particulate matter or trace water in Jet A-1 fuel can cause in-flight ice crystallization, engine fuel filter blockage, and catastrophic turbine failure at high altitudes. Consequently, the regulatory framework governing aviation fuel contractors is among the most demanding in Nigeria.

Regulation is shared between the Corporate Affairs Commission (CAC), the Nigeria Civil Aviation Authority (NCAA), the Nigerian Midstream and Downstream Petroleum Regulatory Authority (NMDPRA), and the Federal Airports Authority of Nigeria (FAAN). Each regulatory tier requires specific legal, technical, and operational accreditations before a contractor can service fueling bowsers, hydrants, or filter vessels on any Nigerian airport tarmac.

Phase 1: Corporate Affairs Commission (CAC) Incorporation

The contractor must incorporate as a Private Limited Company (Ltd) under Part B of the Companies and Allied Matters Act (CAMA) 2020. Business names, partnerships, or unincorporated bodies are strictly barred from providing technical aviation services.

Key corporate requirements include:

  • Minimum Share Capital: The NCAA and airport authorities require technical aviation service contractors to possess substantial capital reserves. The company must be registered with an issued share capital of not less than 20,000,000 Naira, with 50,000,000 Naira strongly advised for contractors managing into-plane filtration systems across international airports.
  • Specific Object Clauses: The Memorandum and Articles of Association (MEMART) must explicitly state technical aviation fuel support services, including filter water separator (FWS) maintenance, coalescer and separator element replacement, microfilter testing, fuel bowser calibration, and aviation fuel quality assurance.
  • Tax Registration: Generate the corporate Tax Identification Number (TIN) and complete Value Added Tax (VAT) and Company Income Tax (CIT) profile activation on FIRS TaxPro Max.

Phase 2: NMDPRA Technical Downstream Permits

Before NCAA will review technical aviation applications, the contractor must obtain downstream petroleum approvals from NMDPRA:

  1. Oil Service Company Permit: Secure an approved permit under the specialized petroleum technical services category from NMDPRA.
  2. Technical Workshop Verification: NMDPRA inspectors must inspect the contractor engineering workshop, calibration rigs, and hazardous fluid containment systems.
  3. Calibration and Test Facility Accreditation: Obtain certification verifying that the contractor test benches comply with national metrology standards for pressure gauges and flow meters.

Phase 3: NCAA Technical Certification

The core operating authorization is granted by the Nigeria Civil Aviation Authority under the Nigerian Civil Aviation Regulations (Nig. CARs) Part 9 and Part 12. The contractor must apply through the NCAA Directorate of Air Transport Regulation (DATR) and submit extensive technical documentation:

  1. Filtration Technical Manual: A detailed manual demonstrating strict compliance with international aviation standards, specifically Joint Inspection Group standards (JIG 1 and JIG 2) and Energy Institute standard EI 1581 for filter water separators and microfilters.
  2. Safety Management System (SMS) Manual: A comprehensive manual outlining operational risk assessments, safety culture protocols, hazard identification, and fuel spill containment procedures.
  3. Personnel Technical Credentials: Certified petroleum engineers, chemical technologists, and trained filtration mechanics holding valid certificates in aviation fuel handling, Millipore membrane testing, and Chemical Water Detector (CWD) capsule sampling.
  4. Aviation Third-Party Liability Insurance: A comprehensive aviation legal liability insurance policy underwritten by an accredited Nigerian insurance company, providing adequate coverage (typically several million US dollars equivalent) to indemnify against contamination claims or aircraft damage.
  5. Physical Inspection and Audit: NCAA flight safety and ground operations inspectors conduct a rigorous physical inspection of the contractor equipment, testing rigs, clean-room filter storage facilities, and mobile service vehicles.

Phase 4: FAAN Airside Permits and Operational Access

To access airport aprons and aircraft parking bays, the contractor must secure clearances from the Federal Airports Authority of Nigeria (FAAN). All personnel must undergo mandatory FAAN Security Awareness Training and receive Airside Operational Permits (AOP). Mobile service units and testing bowsers must pass FAAN safety inspections to receive Airside Vehicle Permits (AVP) with appropriate yellow beacon lights and flame arrestors.

Post-Certification Compliance and Record Keeping

Aviation safety relies on continuous traceability. The contractor must maintain permanent records of every element changeout, differential pressure readings, membrane filtration test logs, and water slug shutoff valve tests. Licenses must be renewed annually with CAC returns filed promptly, ensuring that corporate and regulatory certifications remain valid without interruption.

Was this CAC guide helpful to you?

Your feedback helps our legal editorial team keep Nigerian business guides accurate and practical.

Author / Corporate Contributor

CACTalks

Business registration contributor and corporate compliance researcher at CACTalks. Explaining CAC rules, filing procedures, and CAMA 2020 legal requirements in plain, everyday language.

Fact-Checked against CAMA 2020 Provisions & Official CAC Circulars

Leave a Reply

Your email address will not be published. Required fields are marked *

FREE INTERACTIVE RESOURCES

CAC Calculators & Compliance Generators

Simplify your corporate compliance workflow. Use our free, accredited tools built specifically for Nigerian business founders and corporate secretaries.

CALCULATOR

Annual Return Penalty Calculator

Calculate exact late filing default fees and accumulated arrears for Business Names, Limited Companies, and NGOs under CAMA 2020.

Launch Calculator
CHECKER

Name Availability & Eligibility Checker

Screen proposed business names against prohibited keywords, deceptive designations, and restricted corporate categories.

Check Name Rules
GENERATOR

Board Resolution Generator

Instantly draft legally binding ordinary and special resolutions for corporate bank accounts, director appointments, and share allotments.

Generate Document
ACCREDITED FILING ASSISTANCE

Need Hands-on Support with Your CAC Filing or Registration?

Avoid costly portal query rejections, filing delays, or accumulated penalties. Connect directly with our verified corporate compliance specialists for expedited business name registration, company incorporation, and annual return regularizations.

Mon – Fri: 8:00 AM – 6:00 PM WAT Direct WhatsApp & Call Access