POLICY & DISPUTES CAMA 2020 Guide

What Are the Statutory Rules Governing Capital Allowances on Biomass Briquetting and Biofuel Processing Equipment Under CITA?

CACTalks Verified
Oct 23, 2026 • 4 min read
What Are the Statutory Rules Governing Capital Allowances on Biomass Briquetting and Biofuel Processing Equipment Under CITA?
What Are the Statutory Rules Governing Capital Allowances on Biomass Briquetting and Biofuel Processing Equipment Under CITA?
Quick Overview

Key Takeaways & Regulatory Highlights

  • Plant and Equipment: Biomass briquette extrusion presses, hydraulic densifiers, hammer mills, flash dryers, carbonization kilns, and distillation units attract an initial allowance of 50 percent...
  • Industrial Factory Buildings: Specialized housing structures, boiler sheds, and storage silos for biomass feedstock qualify under industrial building expenditure with an initial allowance of 15...
  • Motor Vehicles and Transport Logistics: Bulk feedstock collection trucks and finished briquette delivery vehicles qualify for an initial allowance of 50 percent and an annual allowance of...
  • Notification of Intent: Companies acquiring processing machinery valued at five hundred thousand Naira and above must notify the Industrial Inspectorate Division (IID) of the Federal...

Under the Second Schedule to the Companies Income Tax Act (CITA) Cap C21 LFN 2004 (as amended by successive Finance Acts), qualifying capital expenditure on biomass briquetting and biofuel processing machinery qualifies for an initial allowance of 50 percent and an annual allowance of 25 percent under the industrial plant and machinery classification. In addition to statutory capital allowances, enterprises engaged in clean bio-energy manufacturing can claim pioneer status tax holidays and enjoy exemption from the general two-thirds restriction on capital allowance utilization against assessable profits.

Statutory Classification of Biofuel Equipment Under CITA

For tax deduction purposes, the Federal Inland Revenue Service (FIRS) categorizes machinery deployed in converting agricultural biomass, sawdust, palm kernel shells, and sugarcane bagasse into densified briquettes or liquid biofuels as Qualifying Capital Expenditure (QCE). Capital expenditure on tangible assets cannot be written off as an immediate operational expense in the profit and loss account; instead, it is amortized through statutory capital allowances deducted from assessable profits.

The Second Schedule to CITA establishes specific allowance rates for assets utilized in biofuel manufacturing:

  • Plant and Equipment: Biomass briquette extrusion presses, hydraulic densifiers, hammer mills, flash dryers, carbonization kilns, and distillation units attract an initial allowance of 50 percent in the year of acquisition and an annual allowance of 25 percent across subsequent tax years.
  • Industrial Factory Buildings: Specialized housing structures, boiler sheds, and storage silos for biomass feedstock qualify under industrial building expenditure with an initial allowance of 15 percent and an annual allowance of 10 percent.
  • Motor Vehicles and Transport Logistics: Bulk feedstock collection trucks and finished briquette delivery vehicles qualify for an initial allowance of 50 percent and an annual allowance of 25 percent.

Unrestricted Utilization for Manufacturing Enterprises

A critical statutory advantage enjoyed by biomass briquette producers is their classification as a manufacturing business under Nigerian tax law. Under Paragraph 24 of the Second Schedule to CITA, non-manufacturing companies have their capital allowance deduction capped at 66.67 percent of assessable profit in any given year of assessment.

Manufacturing and agro-processing companies are expressly exempt from this statutory limitation. A biomass briquetting company can utilize its accumulated capital allowances to wipe out 100 percent of its assessable profit, reducing its corporate income tax liability to zero during heavy capital reinvestment cycles.

Procedural Prerequisites: Industrial Inspectorate Division Certification

To successfully claim capital allowances before the FIRS, corporate operators must comply with the provisions of the Industrial Inspectorate Act Cap I8 LFN 2004:

  1. Notification of Intent: Companies acquiring processing machinery valued at five hundred thousand Naira and above must notify the Industrial Inspectorate Division (IID) of the Federal Ministry of Industry, Trade and Investment.
  2. Physical Site Inspection: Engineers from the IID inspect the biomass plant to inspect installed equipment, verify manufacturer serial numbers, and evaluate capital investment invoices.
  3. Issuance of Certificate of Acceptance: The IID issues an official Certificate of Acceptance confirming the authentic capital cost of the machinery. The FIRS will routinely disallow capital allowance claims in corporate tax filings if this statutory certificate is missing.
  4. Fixed Asset Register Maintenance: The enterprise must keep a contemporaneous fixed asset register detailing purchase dates, installation dates, supplier details, customs clearing documents, and asset physical locations.

Supplementary Tax Incentives and Reliefs

Enterprises investing in biofuel and renewable energy technology can access several complementary statutory tax reliefs:

  • Pioneer Status Incentive (PSI): Under the Industrial Development (Income Tax Relief) Act, renewable energy and waste-to-energy processing are recognized pioneer industries. Eligible companies receive a three-year corporate tax holiday, extendable by two additional years. During the holiday, capital allowances are not deducted; they accumulate and are brought forward to shield post-pioneer earnings.
  • Rural Investment Allowance: Under Section 34 of CITA, where a biomass processing plant is established in a rural area devoid of public infrastructure, the company can claim an additional investment allowance on infrastructure expenditure. The rate is 100 percent where no electricity, water, or tarred roads exist within twenty kilometers.
  • Value Added Tax (VAT) Waivers: Section 46 of the Value Added Tax Act and circulars issued pursuant to national energy transition initiatives provide import duty concessions and VAT exemptions for designated renewable energy machinery and clean cooking equipment.

Was this CAC guide helpful to you?

Your feedback helps our legal editorial team keep Nigerian business guides accurate and practical.

Author / Corporate Contributor

CACTalks

Business registration contributor and corporate compliance researcher at CACTalks. Explaining CAC rules, filing procedures, and CAMA 2020 legal requirements in plain, everyday language.

Fact-Checked against CAMA 2020 Provisions & Official CAC Circulars

Leave a Reply

Your email address will not be published. Required fields are marked *

FREE INTERACTIVE RESOURCES

CAC Calculators & Compliance Generators

Simplify your corporate compliance workflow. Use our free, accredited tools built specifically for Nigerian business founders and corporate secretaries.

CALCULATOR

Annual Return Penalty Calculator

Calculate exact late filing default fees and accumulated arrears for Business Names, Limited Companies, and NGOs under CAMA 2020.

Launch Calculator
CHECKER

Name Availability & Eligibility Checker

Screen proposed business names against prohibited keywords, deceptive designations, and restricted corporate categories.

Check Name Rules
GENERATOR

Board Resolution Generator

Instantly draft legally binding ordinary and special resolutions for corporate bank accounts, director appointments, and share allotments.

Generate Document
ACCREDITED FILING ASSISTANCE

Need Hands-on Support with Your CAC Filing or Registration?

Avoid costly portal query rejections, filing delays, or accumulated penalties. Connect directly with our verified corporate compliance specialists for expedited business name registration, company incorporation, and annual return regularizations.

Mon – Fri: 8:00 AM – 6:00 PM WAT Direct WhatsApp & Call Access